ABS Solar Road Studs Raised Pavement Marker Plastic Cat Eyes Reflector
| Product Name:: | Plastic solar road stud light HT-RS-SP3 |
|---|---|
| Solar Panel | 2.5V / 120mA |
| LEDs: | 6pcs super brightness Φ5mm LEDs |
| Waterproof: | IP68 |
| Compress Resistance: | >30T |
| Size | 105mm × 105mm × 25mm |
| Battery | NiMH battery 1.2V/600MAH / 1.2V/800MAH |
Fast Shipping
Fast and convenient door to door delivery or EXW, FOB, CFR trade term for your choice. Estimated to be delivered within 2-30 days, it's upon your order quantity. Some products have in stock enable us to ship within 2 days.
Longest Warranty
Our products warranty time is from 1 to 3 years. As different products have different warranty time, please contact our sales team to check the details.
Trust and Audited
Passed by SGS and products are tested and passed by CE based on different test standards including EN12352, EN50293, EN60529, EN60598, BS EN12613, EN55015:2013+A1:2015, EN61547:2009, EN61000-3-2:2014, EN61000-3-3:2013, MUTCD & NCHRP-350
Solar road stud light are also named solar raised pavement marker, solar LED road marker and solar cat eye. It is nothing but an “Active Road Stud” with automatic switching function, realized using the combination of a small solar panel, re-chargeable cell, and LED driver circuitry. This type LED road marker clearly visible traffic guidance in all weather conditions. After being energized by the sun, our road stud automatically starts to flash when night falls or with the onset of inclement weather. Solar Road Studs are specifically used to improve safety, reducing accidents on the road by providing information to drivers about the road ahead directly in their natural field of vision
Solar road stud are packed by box,2pc/box,30 boxes per carton,we can also packed the road stud as your request,such as by pallet
Solar Road Stud Application:
1) Crosswalk Marking 2) Dangerous Curves Marking 3) Bike Lane Delineation 4) Fire Hydrant Marking
5) Road Shoulder Marking 6) Route Guidance 7) Traffic Circles Marking 8) Garden And Park etc
Installation process
1.Mark the proper position for the road studs.;
2. Clean road with a brush, to make the surface of road smooth, clean and dry;
3. Put glue on the bottom evenly. Keep it in the right direction and press it into the road tightly ;
4. Check within 2 hours of installation to ensure that all studs are not installed incorrectly and are not bent or deformed due to compression ;
5. After 4 hours of installation, the glue will dry completely;
6. It can also be fixed on both sides with bolts.
