Solar Glass Raised Pavement Marker
| Battery： | 1.2V/600mAh、1.2V/1300mAh、1.2V/1500mAh for NI-Mh battery or 3.2V/500mAh Lithium battery |
|---|---|
| Solar panel ： | 2V/140mA for Ni-Mh battery,5V/70mAh for Lithium battery |
| LEDs： | 6pcs super brightness Φ5mm LEDs |
| Visual Range： | more than 800meters |
| Color： | Yellow,Red,Blue,Green,White |
| Compress Resistance: | >40T |
Fast Shipping
Fast and convenient door to door delivery or EXW, FOB, CFR trade term for your choice. Estimated to be delivered within 2-30 days, it's upon your order quantity. Some products have in stock enable us to ship within 2 days.
Longest Warranty
Our products warranty time is from 1 to 3 years. As different products have different warranty time, please contact our sales team to check the details.
Trust and Audited
Passed by SGS and products are tested and passed by CE based on different test standards including EN12352, EN50293, EN60529, EN60598, BS EN12613, EN55015:2013+A1:2015, EN61547:2009, EN61000-3-2:2014, EN61000-3-3:2013, MUTCD & NCHRP-350
Solar road studs are flashing solar cell powered LED maintenance-free lighting devices used in road construction to delineate road edges and centre lines. Embedded in the road surface, they are an electronic improvement on the traditional cat eyes in that they may give drivers more than a thirty-second reaction window compared with about 3 seconds for conventional reflective devices. The intense brightness of the LED makes them easily visible at distances of about 900 m under favorable conditions.
Why choose Solar road stud light？
LED Light：1、We adopt Taiwan Epistar brand led chips with high lumen and long lifespan; 2、Visual distance up to 800 meters; 3、Ultra bright LED 6pcs with diameter 5mm; 4、Yellow/ White/ Green/ Blue/ Red available.
Solar Panel：1、Big solar panels increase the chargeing efficiency with long working time; 2、 Monocrystalline silicon has higher charging efficiency and longer life.
1. Mark the proper position for the solar road studs；
2. Clean road with a brush, to make the surface of road smooth, clean and dry.；
3. Drilling a hole with a drilling machine (drilling bit 108mm) and clean the hole；
4. Pour some glue in the hole and Put glue on the solar road stud bottom evenly, lastly put the solar road stud to the hole；
5. Check within 2 hours of installation to ensure that all studs are not installed incorrectly and are not bent or deformed due to compression；
6. After 4 hours of installation, the glue will dry completely.；
7. Remove the installation isolation facility within 6-8 hours after the installation of the solar road studs.
