Solar Road Stud Light
| Power Supply: | 2.5V/120mA |
|---|---|
| Battery: | 1.2V/600mAh NI-Mh battery |
| LED: | 6pcs super brightness Φ5mm LEDs |
| Working Mode: | Flashing or Steady |
| Visual Range： | more than 800meters |
| Compress Resistance: | >30T |
Fast Shipping
Fast and convenient door to door delivery or EXW, FOB, CFR trade term for your choice. Estimated to be delivered within 2-30 days, it's upon your order quantity. Some products have in stock enable us to ship within 2 days.
Longest Warranty
Our products warranty time is from 1 to 3 years. As different products have different warranty time, please contact our sales team to check the details.
Trust and Audited
Passed by SGS and products are tested and passed by CE based on different test standards including EN12352, EN50293, EN60529, EN60598, BS EN12613, EN55015:2013+A1:2015, EN61547:2009, EN61000-3-2:2014, EN61000-3-3:2013, MUTCD & NCHRP-350
solar road studs are ground lamps, used to mark potential danger zones in road traffic. Compared to passive reflectors, solar collectors are active in the dark (LED techn-ology), which increases the visibility and marking effect up to 1000 meters. This makes it possible to efficiently mark neuralgic areas such as pedestrian strips, traffic islands, curves, round abouts, etc. The solar road studs is suitable to drive over. It is designed to install flat into the road surface, there is no danger for two-wheelers. Maintenance machines such as snow plows, sweepers etc. are also not hindered.
1、USA brand sunpower flexible solar panel high conversion and charge efficiency ,Compression resistant and not easy to damage；2、Program PCB has high stability；3、Embedded reflector design, not easy to fall off, good waterproof performance；4、Anchor holes or adhesive bond for dual fixation ；5、High-temperature resistance battery and circuit,can be used on the equator.
Solar road stud light are packed by box,2pc/box,30 boxes per carton,we can also packed the road stud as your request,such as by pallet
1. Mark the proper position for the road studs.
2. Clean road with a brush, to make the surface of road smooth, clean and dry.
3. Put glue on the bottom evenly. Keep it in the right direction and press it into the road tightly
4. Check within 2 hours of installation to ensure that all studs are not installed incorrectly and are not bent or deformed due to compression
5. After 4 hours of installation, the glue will dry completely.
6. It can also be fixed on both sides with bolts.
